MAC Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms
An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
Inner chamber are made of Stainless Steel (SS-304 grade).
Outer body are made of Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial arms are made of mild steel.
Rings & legs are made of mild steel.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
Operating range from 15 to 20 psi pressure (adjustable).
Industrial grade energy efficient heaters reduce power bills drastically.
Pressure Control Switch/Pressure Cut Off (*PCO) device.
Low water Level Cut Off (*WCO) device for safety of heating element.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
MAC Fully Automatic Vertical Autoclave is most ideal for critical applications requiring assured and reliable destruction of all living micro-organisms.
These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs, etc.
Inner made of Stainless Steel and outer made of Mild Steel duly painted.
Supporting Ring & Legs are made up of mild steel.
Heaters cover stand and bucket are made of Stainless Steel Sheet.
Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Fitted with neoprene rubber gasket.
All internal joints are argon arc welded.
µProcessor based Controller with time and temperature programmable by the user.
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
Low water level alarm and cut off for the safety of heater.
Sensor open alarm and display.
End of cycle buzzer to alert the user and auto reset.
Miniature Circuit Breaker for MAINS On/Off plus the safety of control panel.
Fitted with a low-water level cut-off device.
Solenoid Valve for automatic purging and exhaust (user settable).
Industrial grade energy efficient heaters reduce power bills drastically.
MAC Semi-Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
These are semi-automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or overexposure of media/ samples with respect to temperature and hold time.
Inner made of Stainless Steel and outer made of Mild Steel duly painted.
Supporting Ring & Legs are made up of mild steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Fitted with neoprene rubber gasket.
All internal joints are argon arc welded.
µProcessor based Controller with time and temperature settable by the user.
Operating range from 15 to 22 psi pressure. (adjustable)
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1OC resolution and + 1OC accuracy.
End of cycle buzzer to alert the user.
Miniature Circuit Breaker for MAINS On/Off plus the safety of control panel.
Industrial grade energy efficient heaters reduce power bills drastically.
Fitted with low water cut-off for the general safety of heating elements.
MAC Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
Inner chamber are made of Stainless Steel (SS-304 grade).
Outer body are made of Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial locking lid ensures user safety and safe locking.
Radial arms are made of mild steel.
Rings & legs are made of mild steel.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
µProcessor based Controller with time and temperature programmable by user.
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
Low water level alarm and cut off for safety of heater.
Sensor open alarm and display.
End of cycle buzzer to alert the user and auto reset.
Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
Fitted with low-water level cut-off device.
Solenoid Valve for automatic purging and exhaust (user settable).
Industrial grade energy efficient heaters reduce power bills drastically.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
Leakproof silicon gasket
Over pressure safety
Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
Low water level cut off for safety of heating elements.
Independent safety for over temperature protection.
Saves Power bills by upto 30%
Heat cured epoxy coating on steel exterior OR Stainless Steel exterior (as ordered).
Electrical on/off safety switch
Easy draining of chamber
Easy portability and placement and movement
Usage Portability
Single lever locking of lid for faster operations.
Heater and pressure interlock for lid lock safety.
Effortless lifting of lid with assisted spring push back support
Accurate temperature control with user level flexibility. Display process and set values simultaneously.
Microprocessor Based Fully Automatic Fuzzy Logic Control System with Alphanumeric Digital backlit LCD display.
Automatic Steam purging and exhaust
Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end.
With LCD display data logger with REAL TIME, DATE, TIME etc directly on PC (SOFTWARE OPTIONAL) or direct on DOT MATRIX PRINTER.
Option
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
TFT Touch Screen Display Controller in lieu of LCD display.
Vacuum Pulsing thru a vacuum pump.
Circular Chart Recorder to cost extra (for Temperature)
Circular Chart Recorder to cost extra (for Temperature and Pressure)
Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
Leakproof silicon gasket
Over pressure safety
Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
Low water level cut off for safety of heating elements.
Independent safety for over temperature protection.
Saves Power bills by upto 30%
Outer body mild steel OR Stainless Steel SS-304. (as ordered).
Electrical on/off safety switch
Easy draining of chamber
Easy portability and placement and movement
Usage Portability
Single lever locking of lid for faster operations.
Heater and pressure interlock for lid lock safety.
Effortless lifting of lid with assisted spring push back support
Accurate temperature control with user level flexibility. Display process and set values simultaneously.
Microprocessor Based Fully Automatic Fuzzy Logic Control System with Alphanumeric Digital backlit LCD display.
Automatic Steam purging and exhaust
Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically when set/desired value of temperature is achieved. When the set time period is over the heaters get switched off automatically with alarm for cycle end.
Option
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
TFT Touch Screen Display Controller in lieu of LCD display.
Vacuum Pulsing thru a vacuum pump.
Circular Chart Recorder to cost extra (for Temperature)
Circular Chart Recorder to cost extra (for Temperature and Pressure)
Backed with 56 years of service to science and our expertise in steam pressure sterilization autoclaves. Our Top Loading PRO Series Autoclaves are the ideal companion for the modern microbiologists and institutes, pharma companies, hospitals etc.
Ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
Leakproof silicon gasket
Over pressure safety
Safe and sturdy chamber manufactured from Stainless Steel (SS-304)
Low water level cut off for safety of heating elements.
Independent safety for over temperature protection.
Saves Power bills by upto 30%
Heat cured epoxy coating on steel exterior OR Stainless Steel exterior (as ordered).
Single lever locking of lid for faster operations.
Heater and pressure interlock for lid lock safety.
Effortless lifting of lid with assisted spring push back support
Automatic Steam purging and exhaust
Accurate temperature control with user level flexibility.
Display process and set values simultaneously.
Electrical on/off safety switch
Easy draining of chamber
Easy portability and placement and movement
At the heart of our PROPLUS series is the touch screen graphical Programmable Logic Controller which delivers exceptional management with progressive notifications.
Recording of operation parameter: Each autoclave has a TFT (TOUCH SCREEN) HMI AND PLC (PROGRAMMABLE LOGIC CONTROL) integrated unit with graphic devices which will automatically and continuously monitor and record dates, time of day, load identification number and operating parameters throughout the entire length of the autoclave cycle and all data can be transferred via EPROM port by simply inserting a pen drive, which can easily by transferred to any PC/Desktop.
Touchscreen PLC for accurate temperature control (control on all temperature channels), built in recipes, power failure restore and password protection upto 3 levels.
User settable alphanumeric batch number and operator name
Built-in six sterilizing modes
Power failure restore
3 Level password protection
User settable alphanumeric batch no. with operator
Auto purging and exhaust
Offline PC connectivity
Service and Calibration reminders
Dual pressure scales in psi and kPA
Printing in smart tabular format with date, time, batch number, operator name and status
Enables authentic documenting of every Autoclave cycle (ON PEN DRIVE)
Options:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
TFT Touch Screen Display Controller in lieu of LCD display.
Vacuum Pulsing thru a vacuum pump.
Circular Chart Recorder to cost extra (for Temperature)
Circular Chart Recorder to cost extra (for Temperature and Pressure)
MAC Semi Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
These are semi automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or over exposure of media/ samples with respect to temperature and hold time.
Inner chamber is made of Stainless Steel (SS-304 grade).
Outer body is made of Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial locking lid ensures user safety and safe locking.
Radial arms are made of mild steel.
Rings & legs are made of mild steel.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
µProcessor based Controller with time and temperature settable by user.
Operating range from 15 to 22 psi pressure. (adjustable)
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1°C resolution and ±1°C accuracy.
End of cycle buzzer to alert the user.
Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
Industrial grade energy efficient heaters reduce power bills drastically.
Fitted with low water cut-off for general safety of heating elements.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
MAC Fully Automatic Vertical Autoclave are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
These are fully automatic models requiring no human intervention till a full sterilization cycle is over.
Inner chamber are made of Stainless Steel (SS-304 grade).
Outer body are made of Stainless Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial locking lid ensures user safety and safe locking.
Radial arms are made of mild steel.
Legs are made of mild steel.
Rings are made of Stainless Steel.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
µProcessor based Controller with time and temperature programmable by user.
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring.
Low water level alarm and cut off for safety of heater.
Sensor open alarm and display.
End of cycle buzzer to alert the user and auto reset.
Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
Fitted with low-water level cut-off device.
Solenoid Valve for automatic purging and exhaust (user settable).
Industrial grade energy efficient heaters reduce power bills drastically.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
MAC Semi Automatic Digital Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
These are semi automatic models requiring tighter control of temperature and sterilizing time, thus eliminating any chances of under or over exposure of media/ samples with respect to temperature and hold time.
Inner chamber is made of Stainless Steel (SS-304 grade).
Outer body is made of Stainless Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial locking lid ensures user safety and safe locking.
Radial arms are made of mild steel.
Legs are made of mild steel.
Rings & legs are made of mild steel.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, extra Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
µProcessor based Controller with time and temperature settable by user.
Operating range from 15 to 22 psi pressure. (adjustable)
Class ‘A’ Platinum (Pt-100) sensor, enabling precise and accurate monitoring in 0.1°C resolution and ±1°C accuracy.
End of cycle buzzer to alert the user.
Miniature Circuit Breaker for MAINS On/Off plus safety of control panel.
Industrial grade energy efficient heaters reduce power bills drastically.
Fitted with low water cut-off for general safety of heating elements.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
MAC Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms.
An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
Inner chamber are made of Stainless Steel (SS-304 grade).
Outer body are made of Stainless Steel.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Lid made of thick machined Stainless Steel plate.
Radial arms are made of mild steel.
Legs are made of mild steel.
Rings are made of Stainless Steel.
With radial locking system.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
Moulded jointless silicon rubber gasket.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
Operating range from 15 to 20 psi pressure (adjustable).
Industrial grade energy efficient heaters reduce power bills drastically.
Pressure Control Switch/Pressure Cut Off (*PCO) device.
Low water Level Cut Off (*WCO) device for safety of heating element.
To work on 220/230Volts, 50/60 Hz AC supply.
Optional
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer to customer scope) (FOR DIGITAL MODEL ONLY)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra) (FOR DIGITAL MODEL ONLY)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
Spare Silicon Gasket to cost extra.
Spare Heater to cost extra.
TFT Touch Screen Display Controller in lieu of LCD display.
Circular chart recorder to cost extra (for Temperature only)
Circular chart recorder to cost extra (for Temperature and Pressure only)
