Leading Manufacturers, Exporters, Wholesaler, Retailer and Trader of High Pressure High Speed Horizontal Cylindrical Steam Sterilizer, High Pressure Horizontal Cylindrical Steam Sterilizer, High Pressure Horizontal Rectangular Steam Sterilizer and Triple Walled Vertical High Pressure Steam Sterilizer from Pune.
MAC Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.
The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.
Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
Hydraulically tested to withstand 2.5 times the working pressure.
Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.
This affords complete safety to the working personnel against the explosive opening.
Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
Sterilization Cycle is controlled by SINGLE POINT Multiport Valve.
The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
An automatic vacuum breaker is fitted to all “MAC” units as a standard accessory, in order to break vacuum in case of steam condensation.
The flanged immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.
All “MAC” Sterilizers are provided with triple safety features, through a “PIEZOSTAT” (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.
To work on 440Volts, 3phase, 50Hz AC supply.
Options:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).
Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.
Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.
Digital Pressure & Compound gauges can be provided in lieu of analog gauges.
Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.
TFT Touch Screen Display Controller in lieu of LCD Display.
Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.
Double door for any of the above models to cost extra.
Spare Silicon Gasket to cost extra.
Spare Silicon Gasket to cost extra.
Circular chart recorder to cost extra (for Temperature only).
Circular chart recorder to cost extra (for Temperature and Pressure only).
MAC Horizontal Triple Walled Autoclaves are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
All ideal tool for Laboratories, hospitals, nursing home, R&D labs, etc.
The inner chamber, steam jacket, outer chamber, and boiler are made of heavy gauge stainless steel with leak-proof argon arc welding.
Lid is made of thick machined Mild Steel plate lined with stainless steel from inside
The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
Hydraulically tested to withstand 2.5 times the working pressure.
Steam boiler is fitted with water level indicator, pressure gauge, low water cut-off device, and automatic pressure control device.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
The unit is provided with a positive self-locking safety door which cannot be opened while the chamber is under pressure and disengages automatically when the chamber is exhausted.
This affords complete safety to the working personnel against the explosive opening.
Two separate valves are provided for evacuating steam from inner chamber and jackets as and when desired.
Sterilization Cycle is controlled by SINGLE POINT Multiport Valve.
The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
An automatic vacuum breaker is fitted to all “MAC” units as a standard accessory, in order to break vacuum in case of steam condensation.
The flanged immersion-type heating element made from very high-grade material provides the fast formation of pressure in the system and are protected through an electric low water level cut-off device.
All “MAC” Sterilizers are provided with triple safety features, through a “PIEZOSTAT” (Automatic Pressure Control System) and a spring-loaded safety valve fitted to the boiler/steam generator. The chamber is fitted with spring-loaded safety valve and a dead weight release valve.
Highly accurate temperature indicator is fitted for monitoring temperature.
To work on 440Volts, 3phase, 50Hz AC supply.
Options:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).
Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.
Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.
Digital Pressure & Compound gauges can be provided in lieu of analog gauges.
Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.
TFT Touch Screen Display Controller in lieu of LCD Display.
Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.
Double door for any of the above models to cost extra.
Spare Silicon Gasket to cost extra.
Spare Silicon Gasket to cost extra.
Circular chart recorder to cost extra (for Temperature only).
Circular chart recorder to cost extra (for Temperature and Pressure only).
MAC Sterilizers are most ideal for critical applications requiring assured and reliable total destruction of all living micro-organisms.
Inner Chamber is made up of thick non-magnetic steel of 304 quality and jacket is made out of rolled steel.
Single door made of rolled steel lined with S.S. sheets has radial locking system.
The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.
Boiler is made of thick stainless steel sheet and is located under the sterilizer.
Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.
Unit is also fitted with low-water level cut-off device and automatic pressure control device.
All “MAC” rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.
The door cannot be opened when chamber is under pressure.
Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.
Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.
To work on 440 volts, 3 Phase, A.C. Supply.
Options:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope).
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope).
Digital Temperature Controller with timer can be fixed at an extra cost. Once the temperature is attained it will automatically start the timer. It raises on alarm at a set time, so that operator is alerted & he can perform balance operations.
Automatic water feed system can be incorporated in the boiler, so that at higher level is switched off the water pump and restart is at lower level automatically.
Digital Pressure & Compound gauges can be provided in lieu of analog gauges.
Vacuum pulsing through a closed coupled water ring high vacuum pump for creating forced vacuum and fast drying process.
TFT Touch Screen Display Controller in lieu of LCD Display.
Multipoint Temperature/Pressure Scanner with LCD display and CENTRONIC port for printer. Total 8 scanning points with five for temperature and one for pressure. Supplied complete with 7 Nos. RTD probes and one pressure transmitter sensor.
Double door for any of the above models to cost extra.
Circular chart recorder to cost extra (for Temperature only).
Circular chart recorder to cost extra (for Temperature and Pressure only).
“MAC” Vertical Autoclaves are most ideal for all applications requiring, routine total destruction of all living micro-organisms
An Ideal tool for Laboratories, hospitals, nursing homes, R & D labs etc.
Heaters cover stand and carrier/bucket are made of Stainless Steel.
Specially designed system for dry sterilization processes, the system is a triple walled unit with inner chamber, jacked and outer wall made of Stainless Steel.
Lid made of Stainless Steel is closed through a RADIAL LOCKING ARRANGEMENT.
The chamber is leak proof and all joints are duly argon arc welded.
Mounted on mild steel support legs.
The system is supplied without basket and without dressing drum, however the same are available at extra cost.
Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, Vacuum Breaker-cum-Purge Valve as a safety device and water level indicator.
Drain Valve facilitates easy cleaning of the chamber.
All internal joints are argon arc welded, ground and polished to give crevice free internals.
Operating range from 15 to 20 psi pressure (adjustable).
Industrial grade energy efficient heaters reduce power bills drastically.
To work on 220/230Volts, 50/60 Hz AC supply.
Option:
G-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and USB Port for taking data (Paperless Data Recording) and Saving ON PC. (DOT Matrix Printer to customer scope)
P-LOG – Fully automatic digital (FAD) with real time data logger with CENTRONIC PRINTER PORT (DOT MATRIX) and RS-485 PC communication port with 21 CFR compliant software and data cable for logging data directly to your PC. (DOT Matrix Printer and PC to customer scope)
Validation documentation (Mapping) with (3+1) point temperature scanning for one cycle each on empty and loaded conditions (to cost extra)
Drain/Exhaust cooling through a cooling coil condenser for condensate collection.
TFT Touch Screen Display Controller in lieu of LCD display.
